Hooklifts from chassis from 3.5tonnes - 32 tonnes
Hooklift Solutions can supply you with a range of hooklifts to fit to chassis from 3.5 tonnes to 32 tonnes as illustrated below. In addition these hooklifts can be fitted with sheeting systems, loadcell weighing systems and set up for drawbar operation if required.
Hooklift suitable for chassis 3.5 tonnes - 6 tonnes G.V.W
- Low ULW of equipment to maximise payload
- Tilting neck operation
- Hydraulic container locking as standard
- Option of hydraulic Rear stabiliser
- 12 V or 24 Volt to suit chassis
Supplied and fitted from £10,950.00p + VAT
Hooklift suitable for chassis from 7.5 tonnes - 10 tonnes G.V.W.
- 5 tonnes lift capacity
- Low ULW of equipment to maximise payload
- Telescopic Arm operation
- Hydraulic locking as standard
- In cab controls
- Electric control option for those chassis not fitted with air
Supplied and fitted from £12,500.00p + VAT
Hooklift suitable for operation with 18 tonne chassis
- 12 tonne lift capacity equipment
- Telescopic Arm operation
- High tensile sub-frame to reduce weight
- In cab pneumatic controls
- External hydraulic control
supplied and fitted from £17,750.00 + VAT
Hooklift suitable for 6 x 2 or 6 x 4 chassis at 26 tonnes G.V.W.
18 tonnes lift capacity
- High tensile sub frame to reduce weight
- Low loading height
- Telescopic Arm Operation
- In cab pneumatic controls
- External hydraulic controls
- Rear bogie blocking on chassis with steel suspension
- Suitable for both solo and drawbar operation
- supplied and fitted from £21,500.00p + VAT
Hooklift suitable for 8x4 chassis at 32 tonnes G.V.W.
25 tonnes lift capacity
- High Tensile sub frame to reduce weight
- Low loading height
- Telescopic Arm Operation
- In cab pneumatic controls
- External hydraulic controls
- Rear bogie blocking on chassis with steel suspension
- Suitable for both solo and drawbar operation
- supplied and fitted for the sum of £22,500.00p + VAT
Hooklifts suitable for ADT chassis for site work
25 tonne lift capacity
- High tensile sub frame
- Engineered to work on higher chassis height ADT chassis
- Higher lifting capacities are available for higher capacity ADT chassis
- Available to work with longer bins (up to 8.5m if required)
- Can be supplied to new chassis or installed on low hours models
- Installation includes extending the chassis and rear overhang for correct weight distribution
Supplied and fitted from £ 29,450.00 + VAT
Print 